Pulsafeeder

Pulsafeeder Expertise

Technology is the key to delivering responsible products to the markets that we serve. Leading the way in the development of metering technologies, Pulsafeeder continues to set the standard for accuracy, reliability and safety. Innovation is another hallmark of Pulsafeeder. Helping customers find a new approach to an old problem is what we do best.

PULSAtron Series Pumps

For over 20 years, the PULSAtron product line has evolved into philosophy of design that continues to set the standards for the entire industry. Our engineers have developed a guided check valve system with a proven ‘seat and ball’ design that ensures reliable and accurate metering year after year.
Our fin cooled Solenoid enclosure dissipates heat ensuring that the pressure handling capability of the pump can be maintained. The thermally protected Solenoid protects the pump from seizing up in extreme heat conditions with an  automatic reset feature allowing the pump to resume operation upon cool-down. All PULSAtrons are tested and rated under hot conditions guaranteeing that the flow and pressure ratings meet the specifications.

Product Specifications
• Flows to 600 gpd ( 94.6 lph) on specific series
• Pressures to 250 psi (17 Bar) on specific models
• Accuracy +/- 2% at max capacity on E Plus, HV and
MP Series. +/- 3% at max capacity on A Plus, C, C Plus, and E Series.
Materials of Construction
• Housing – PBT
• Head materials – GFPPL, PVC, PVDF, Viton, 316SS
• Seats materials – CSPE, TFE, Viton
• Ball materials – Alloy C, Ceramic, TFE, 316SS
• Diaphragm – PTFE faced CSPE
Typical Applications
• Car Wash
• Water Conditioning
• Water Treatment
• Ware Wash

 

Pulsatron-Range

Diaphragm Metering Pump Technology

The PULSAtron family are solenoid powered diaphragm metering pumps. The key element which differentiates these pumps from other types is the TFE lined elastomer diaphragm. This diaphragm is sealed against the reagent head forming a seal-less, leak free pumping chamber. The solenoid driver is connected to the diaphragm to create the pumping motion. As the diaphragm moves away from the face of the reagent head, it creates a vacuum which closes the discharge check  valve and opens the suction check valve, drawing the pumped fluid into the pumping chamber. As the solenoid forces the diaphragm toward the face of the reagent head, the suction check valve closes and the discharge check valve opens allowing the liquid to flow out the discharge valve.

pulsafeeder

PULSAtron Configurations

Configurations

The Pulsatron is available in several different series.
Shown here are the Pulsatron MP Series, E Plus Series, HV Series, A Plus, and C Series.

 

pulsatron MP Series

  • Automatic control, fully scalable 4-20mADC, 20-4mADC or
    external pacing
  • Manual control allows for a combined 1000:1 turndown
  • Flow verification option is available on select sizes
  • 16 character LCD display and indicator lights
  • Relay and stop outputs
  • Simple prompts in plain language and programmable in four
    languages
E-Plus-Series E Plus Series

  • 100:1 turn down ratio
  • Optional 4-20mA with stop function
  • Optional external pacing with stop function
  • Auto-Off-Manual selection switch with indicator lights
  • Built in circuit protection with easy access panel mounted fuse
  • Clear hinged cover over controls for water resistance
HV-Series HV Series

  • Automatic control, available with 4-20mADC direct or external
    pacing, with stop function
  • Manual control by on-line adjustable stroke rate & stroke
    length
  • Viscosities to 20,000 CPS
  • Auto-Off-Manual switch
  • Highly reliable timing circuit
A-plus,-C-plus,-E-series A Plus, C Plus, E Series

  • 100:1 turn down ratio
  • Water resistant for outdoor installation
  • Manual control by on-line adjustable stroke length and stroke
    rate
  • Optional external pacing with Auto/Manual switch on A Plus
  • Internally dampened to reduce noise
C-Series C Series

  • 10:1 turn down ratio
  • Optional automatic control by external pacing with prime switch
  • Manual control by on-line adjustable stroke length
  • Liquid low level option available to prevent loss of prime
  • Manual control by on-line adjustable stroke length
  • Internally dampened to reduce noise

 

Premium Premium Construction

  • Few moving parts
  • Optional wet-end
    materials
  • High Viscosity handling
  • Long life diaphragm
  • Leak free design
Bleed Bleed Valve Assembly Standard

  • Safe & easy priming
  • Durable and leak free
Guided Guided Ball Check Valve System

  • Dual ball check with TFE seats
  • Reduce back flow
  • Outstanding priming
    characteristic
Highly-Reliable Highly Reliable Electronics

  • Timing circuit
  • Rated hot forcontinuous duty
  • Thermal overload

Automatic Degassing Technology
The unique degas valve system is designed to allow air to be vented from the pump head while minimizing the return fluid volume. This allows the pump to be totally self-priming which eliminates the need for a bleed valve. The degassing head also prevents the pump from losing its prime due to gas build up, especially in applications where the pump is run intermittently with long off times between runs.

Proportional Process Control
The PULSAtron series metering pumps offer a wide variety of process control inputs.

  • 4-20mA inputs for metering control with water meters and PLC’s.
  • Dry contact pulse inputs for use with PLC’s and dry contact water meters.
  • External remote stop input that can be used with a level wand for low chemical level control.

Controls, Options and Systems

Automatic Control

  • External/remote pacing, with stop available on E Plus, HV, MP Series
  • External pace with auto/manual selection available on A Plus and C Series
  • Flow Verification available on MP pumps 100 psi or less

Integrated Tank System
Available on all PULSAtron models

  • 15 gallon tank
  • Bulk head assembly
  • Flow indicator
  • Float assembly
  • Pump mounting plate

Five Function & Five Function De-Gas Valve

  • De-Gas – Bypass gasses and fluid with Five Function De-Gas Valve
  • Back pressure
  • Anti-Siphon
  • Air bleed
  • Discharge drain
  • Pressure Relief with Five Function Valve

Valves
Optional Valves available

  • Double ball standard with TFE seats
  • Spring loaded
  • NPT connections
  • Metric connections
  • Ceramic, Stainless and TFE balls
  • CSPE, Viton, and TFE seats

Pre-Engineered System and Panel Mounted Systems
Available on all PULSAtron models

  • Pre-Configured system
  • Easy to install and operate
  • Mounting flexibility
  • Quick delivery
  • Designed for harsh environments

Typical Installation
Typical Installation Includes:

  • Tank
  • Calibration Column
  • Pulsation Dampeners
  • Pressure Relief Valve
  • Pressure Gauge

All Available through Pulsafeeder!

KOPkits Calibration-Kit Pump-Shelf
KOPkits
When you need a part, you’ve
got it. A KOPkit can help you cut
downtime and put you back in
business fast.
Calibration Kit
Calibration columns are used on
the supply side of the pump to
permit flow calibration.
Pump Shelf
Designed to safely and securely
mount your metering pumps on a
wall or level surface and contain
any potential spills.
Pulsation-Dampeners Corporation-Stop Pressure
Pulsation Dampeners improve
pump system efficiency by removing
pulsating flows from positive
displacement pumps.
Corporation Stop
Pulsafeeder’s high quality brass
corporation stop and nozzle
assembly disperses chemical
into the center of a line for even
mixing.
Pressure Relief Valves prevent
an over pressurization situation
from ever damaging your pumps
or pipes. Over pressurization
can occur when a valve is
closed or a blockage occurs.
They are always recommended
equipment for any pump or skid
system.
Solution-tanks Solenoid
Solution Tanks
Available in sizes from 15 to 500
gallon.
Solenoid Valves are used
to permit and shut off fluid
flow.